|Payment Type:||L/C,T/T,Paypal,Money Gram,Western Union|
|Terms of Trade:||FOB,CFR,CIF,EXW|
|Min. Order:||1 Piece/Pieces|
|Delivery Time:||4-8 Days|
Model No.: BB130241002
0200 Type Pulse Valve Solenoid Coil
The enameled wire is the main raw material for 0200 type pulse valve solenoid coil winding. It is mainly composed of a conductor and an insulator. After the bare wire is annealed and softened, it is heated and molded after repeated painting. However, it is not easy to produce the requirements that meet the requirements of the standard and meet the needs of various customers. It is subject to factors such as raw material quality, process parameters, production equipment, and environment. Therefore, even the same type of enameled wire may be of different quality. All have four properties: mechanical properties, chemical properties, electrical properties, and thermal properties. The quality factor Q is a weight parameter that reflects the quality of the coil. Increasing the Q value of the coil is one of the important points that must be paid attention to when winding the solenoid coil.
Technical data of 0200 type pulse valve solenoid coils:
Model Number BB13241002 Normal voltage DC24V/AC220V/OEM Normal power AC:18VA DC15W Insulation class H, F Connection type DIN43650A Application SCG series pulse solenoid valve Weight 137.5 g Inside Hole 13 mm Height 41 mm
Overall dimension of Best-Nr0200 economical pulse valve coils:
Physical pictures of AC220V/24VDC Hole 41mm High Plastic Coils:
SCG Series Pulse Jet Valve Accessories Solenoid Coils:
Broken wire is a problem we encounter in the process of winding the coil. If there are many broken wires, it will seriously affect the production efficiency and yield. In the production process, we should avoid such situations as much as possible. If there is a problem with the disconnection, you should look for the following reasons:
1. The barrel is not placed correctly: the position of the barrel has clear requirements. The position of the barrel is not the same. If the height is not enough, the bottom of the barrel can be padded to avoid the line being scattered at the bottom of the barrel. The jam causes damage to the barrel mouth of the wire barrel cover.
Treatment method: pad the bottom of the wire barrel and check the barrel mouth.
2. Poor tension setting: The winding tension setting is too large (broken wire when winding), and the hook thread tension setting is too large (broken line when hooked).
Treatment method: After the tension check table is used, the spring can be set to check and the winding can be set. The tension setting is related to the material of the coil, the size of the coil, the winding speed, etc. Several factors should be considered when setting the tension.
3. Unusual spring on the tension mechanism: When the spring force is large, the wire will be broken.
Treatment method: Switch to a suitable spring.
4. The position of the retaining sleeve and the hook sleeve are not correct: the retaining sleeve is flush with the hook sleeve, and even shorter (the retaining sleeve push-pull or push-key wear is serious). The wire is scraped at the opening of the hook sleeve when the wire hook is not fully pushed out.
Treatment method: Adjust the distance between the retaining sleeve and the hook sleeve according to the instruction manual.
Welcome to your inquiry!
BRANDO is one of leading manufacturers of solenoids, armature assembly, and solenoid valve in China, located in China main sea port city -- NINGBO, the location with high convenience of shipment not only by air but also by ocean.
BRANDO has 4800 square meter workshops and around 50 employees, developed about 10 years from year 2008 by focusing on products quality, design, service, now with good reputation from all over the world and our annual output value increasing yearly by yearly, moreover, more than 90% of annual output value is from exporting brought from our high quality and best customer service. We highly believe to run the company and brand well should keep faith of BEST QUALITY, BEST ATTITUDE, and BEST CUSTOMER SERVICE.
BRANDO`s products range covering solenoid coil, solenoid valve armature assembly, various solenoid valves, fluid medium such like pneumatic, hydraulic, water, hot water, air, steam, gas, oil, chemical liquid and others. We supply OEM and ODM, all products widely applications for automotive, automation, textile industry, pneumatic , hydraulic, air and water treatment systems and so on.
Model series have such like Q22HD, 2W, 2S, US, 2L, 223, 6014, 0311, 0927, 0955, PU220, PU225, 2P, 2V, VX2120, QX, VX22, VX31/32/33, ZQDF, SCG, CA, DMF, 4V100, 4V200, 4V300, 4V400, VF, VZ, EVR, etc... Any request just feel free to contact our sales team, will response once get message, email or calling.
BRANDO company is approved by ISO9001:2008 system and managed by 5S management, with clean workshop environment and high precision machines and strict operation paperwork procedure to ensure the production well, save delivery time, and reduce any waste to satisfy all clients all over the world.
BRANDO company welcome clients from all over the world, we attend exhibition in many countries, such like America, Europe, Australia, Malaysia, Pakistan, Egypt, New Zealand, Poland, Germany, Korea, India, Indonesia, etc. We highly welcome your visit at our booth or our company.
Quick review of BRANDO products: